It is equipped with a 5.5 mm / 2.5 mm DC jack plug to connect to a SMPS power supply. Maximum voltage must not exceed 20 V. Two 3P connector on one end and two 4P connector on the other end can be used to connect both Dynamixel AX series or Dynamixel DX/RX series. One of each pair of connector is connected to the motor and the other one to a USB2Dynamixel or to a USB2AX. The power and communication line are all connected making it possible to operate as the Dynamixel expansion bus.
- 2x 3P connector for Dynamixel AX series
- 2x 4P connector for Dynamixel DX/RX series
- can be used by connecting to a proper DC terminal
- maximum supply voltage must not exceed 20 V
- shrink tube used to protect from short circuit
- 1x SMPS2Dynamixel
Robotis SMPS2Dynamixel Board
- This SMPS2Dynamixel device provides power for the Dynamixel motor. It should be used together with the USB2Dynamixel to provide both data et power to the Dynamixel motors.
- $ US5.90 $ US5.50 USD 200.00 Left For Free Shipping
- 5 or more $ US5.85
- 10 or more $ US5.80
- 25 or more $ US5.75